12/5/2023 0 Comments Liquid calcium![]() That hydrogen is blocking the movement of nutrients in the soil and to the plant that in turn hinders growth, and causes the fertilizer to become bound up and go to waste. This is what causes a pH to become acidic. The lower the saturation gets for calcium and magnesium the more nitrogen will build up in the soil. What base saturation shows is the percentage quantity of calcium, magnesium, potassium, and hydrogen in the soil. Just like some forms of lime are used for hardening soil before construction, or to be mixed with concrete, there is a distinct difference and importance in understanding ag grade products meant for agriculture purposes, and crude material used for construction or in tires.īase saturation is something more often than not too quickly overlooked on a soil test. It is very important to take note that chloride in this form is not the same as the crude calcium chloride used on roads and in tractor tires. ![]() Chloride in this small amount is proven to increase photosynthesis in the plant creating faster and stronger growth, and also increasing drought resistance and disease resistance and suppressant. The raw calcium is then mixed with carrying agents, surfactants, and chloride to make the ease of application and delivery simple and very effective. ![]() The crude material then goes through a process of heating, liquifying and then extracting the pure soluble liquid calcium, doing away with all the sediment that would normally end up in your soil, and chelating the calcium to make it ready for agriculture use. But unlike limestone, the process does not stop there. Typically, 300 pounds of a dry 10-20-10 fertilizer applied to the ground would find only 60 pounds (20% of 300lbs) actually becoming available to the plant during the growing season.īio-Active Calcium initially is mined from the ground in the same way that limestone is extracted and pulverized. As a result, nearly all the universities have found the availability of dry fertilizers to average between 10 and 20%. Normally, much efficiency is lost in the process due to weather conditions and the chemical make up of the soil tending to the “tie-up” nutrients. Further breaking this down in terms of N, P, and K, the plant should receive and use 6.1 pounds of Nitrogen (10% N), 12.2 pounds of Phosphorus (20%), and 6.1 pounds of potash (10% K).ĭry granular fertilizers are using less costly raw materials that are toxic to the plant and must be applied to the soil, which in turn gives it over to the plant. Assuming an availability of 90%, the plant would receive about 61 pounds of fertilizer per acre. Six gallons per acre of a 10-20-10 liquid plant food weighing 11.4 pounds per gallon will weigh about 68 pounds.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |